Fully Automatic Mask Making Machine Maintenance Methods

Now days,People's demand for masks is still relatively high, in such a situation, the fully automatic mask making machine is still put into use in large numbers.Because of improper maintenance, the loss of mask manufacturers is relatively large. If the correct maintenance can be carried out, a large amount of expenditure can be reduced.

Following are some tips of  how to maintain mask making machine on daily life,hope could help you:
 
1. Daily ventilation, drying and cleaning of the face mask making machine working environment are required. A clean environment is conducive to the long-term operation and optimization of the fully automatic mask machine.
2.The electrical control box and equipment vents should be away from the water, but also need the principle of dust and corrosive chemicals, regular clean dust in the compressed air system.
3. Regularly check the insulation performance of the line. The electronic components that are easy to be aged should often check whether the line is connected firmly and whether the grounding device is reliable.

4. Regularly test the voltage and current of the power supply to make sure that the current and voltage meet the requirements of the equipment, so as to avoid affecting the normal operation of the equipment due to the instability of the voltage level.
5. The first to do a good job of lubrication for the transmission system, when it is found that the quality of the lubricating oil of the gear reducer decreases significantly, it is necessary to replace the new lubricating oil in time.
6.Regularly do ultrasonic welding head, bottom mold cleaning work, the work of the material also need to keep clean, it is recommended to check once a week whether the connector is firmly connected, often wipe the appearance of the equipment, but can not use liquid to wipe, if the stains are obvious, you can use a cloth with some alcohol to wipe.